Phone: 1-888-735-3012

Interior Concrete Insulation System (CIS)

High Performance Rigid Insulation System for Interior Basement, Concrete & Masonry Walls

The Quik-Therm Interior Concrete Insulation System (CIS) is a Patent and Patent Pending All-In-One composite, rigid foam insulation and framing system designed for interior basement, concrete & masonry walls and Heritage Buildings.

Quik-Therm CIS is lightweight, cost effective and fast and easy to install. CIS does NOT absorb water and will NOT promote mold or mildew. CIS has been tested by government approved certified laboratories and is supported by leading building scientists.

LIFETIME WARRANTY

Transferrable Lifetime Non-Prorated Warranty.


 

ELIGIBLE FOR GOVERNMENT ENERGY SAVINGS PROGRAMS

Meets Canadian building code requirements. Outperforms ALL conventional interior concrete insulation systems.

 

 

 

 

COLD CLIMATE TESTED

Quik-Therm CIS has been tested to rigorous new test standards designed to simulate Canadian winters. Temperature range: Outside -18C to Inside +21C with a 22 KPH wind / -31C wind chill factor.

National Research Council Canada states "Air leakage accounts for up to 40% of the energy lost in most buildings."

 

 

6 IN 1 INSULATION SYSTEM

Continuous high performance insulation with two impervious barriers. Radiant, radon, air and vapour barrier and advanced grid framing system – ALL IN ONE.

 

 

 

FOAM BASE GASKETS

½” foam gaskets enhance the system R-value performance by isolating cold floors from warmer wall cavities.

 

 

 

STRONG & LIGHTWEIGHT WITH T&G CONNECTIONS

Foamed in place, tongue and groove CIS panels stop air leaks. Panels are attached to walls with IDP concrete anchors or compatible foam adhesives. Available in 4’ x 8’, 10’ and 12’ ft. lengths and thicknesses between 2.5 and 6 inches.

 

 

STUD STABILIZERS – PRE MEASURED STUD SPACING

100% recycled plastic stud stabilizers are inserted into pre-manufactured hermetically sealed slots that are located every 8 inches. Recycled 25 gauge L-Studs are fastened to stabilizers and top and bottom base angles. For most applications, 24” O.C. stud spacing is recommended.

 

 

 

PLUMB & LEVELS UNEVEN WALLS

L-Studs can move inward or outward from walls. Once plumbed in place, L-Studs are fastened to the stabilizers.

 

 

 

FIRE PROTECTION

Metal framing combined with two code compliant fire rated building materials (drywall and concrete) meet Canadian fire rating regulations.

 

 

 

FAST & EASY ELECTRICAL & PLUMBING

Empty wall cavities are ideal for electrical and plumbing. Pre-drilled holes in stud stabilizers allow for easy wiring. Because wall cavities are warm, pipes won't freeze.

 

 

 

 

SUPERIOR COMFORT & ENERGY EFFICIENCY

Mirror like surfaces reflect energy back to its source. Comfort of basements and buildings is increased by up to 5 degrees.

 

 

 

 

WHICH INSULATION SYSTEM WOULD YOU WANT IN YOUR BASEMENT OR BUILDING?

 

Dark colors indicate moisture, air leakage and energy loss and high energy bills.   Light colors promise a comfortable and healthy living environment and low energy bills.
IR Image - R-20 Fiberglass Insulation & Studs   IR Image - 2" Quik-Therm CIS
R-20 Fibreglass & Studs   2" Quik-Therm CIS

 

 

HEALTHY LIVING ENVIRONMENT

No formaldehyde or mineral fibers. Doesn't absorb moisture and will not support mildew or mold.

 

 

ENVIRONMENTALLY RESPONSIBLE

Does not produce ozone-depleting off-gasses. CIS may contain up to 15% recycled expanded polystyrene (EPS). Stud Stabilizers contain 100% recycled plastic. Metal L-Studs are manufactured utilizing 63% recycled content.

 

 

BEST VALUE

Quik-Therm CIS provides superior energy savings and comfort at an affordable price.

 

NOT CONVINCED?

Read what our customers say

 

CODE COMPLIANT COST EFFECTIVE SAVES ENERGY DOLLARS HEALTHY & COMFORTABLE LIVING ENVIRONMENT FAST & EASY TO INSTALL

Bottom Banner